We are buyers and seller of metalworking industrial machinery with over 43 years of experience. Boring mills, Fabricating equipment such as plate rolls up to 8 inch thick, press brakes up to 3000 ton, lasers, waterjets, CNC lathes and machining centers such as Haas, Hurco, Mazak Mori, etc ,gantry mills,larger equipment such as hydraulic presses, lathes and vbms, liquidations, plant sales are some of our areas of expertise. Use our expertise and experience for all of your buying and selling needs for both new and used metalworking industrial machinery.
We look forward to serving you!!!
Search Our Machine on Search Engine Below :
Specifications:
Swing - Over Bedways: 29 ½” (750mm)
Swing - Over Carriage: 21”. (534mm)
Swing – Gap: 49 ½” (1260mm)
Gap – Length: 16 ½” (420mm)
Turning Length – Maximum: 118” - (3000mm)
Cross Slide Travel: 22”. (560mm)
Threading (40): English & Metric Full Length Lead Screw Threading
Sliding Feeds Per Revolution: .002” - .062” (.055 – 1.55mm) .
Surfacing Feeds Per Revolution: .001” - .031” ( 0.027 – 0.77mm)
Speeds – (18): 4 - 350 RPM
Hole thru Head Stock: 16 3/8” (416mm)
Motor - Main Drive: 30 HP., 3/60/230-460V
Dimensions of Machine: 20’ LR x 84" FB x 80"H
Weight: 30,000#
Equipped with:
Large Spindle Bore – 16 3/8”
Machine Rebuilt with New DRO in 2017 at a Cost of $90,000 – No Service in Use Since
Newall DP700 XY DRO
4 Way Tool Post Tool Holder
30” Four Jaw Lathe Chuck with Guard Guard
Steady Rest & Follower Rest – 5MT
58 foot x 2200Ton Accurl Press Brake Hydraulic CNC Press Brake, Year 2019
Full CNC control
Front gaging
Set up for This brake is LOADED & equipped with a Delem DA66 Touch control system (2D/3D), DSP Laser Safety Protection, Top & bottom tooling with quick clamp system, Hoerbiger Hydraulics, A/C Unit for Electrical Cabinet, Siemens motor & Electrical, etc.
This system is also equipped with a Y1/Y2 cylinder ram configuration to ensure long lasting repeatability and tolerances for years to come. (+/- 0.0003" Ram Repeat).
You'll find that aside from what we sell; the most important thing to us is what we give.. And that's after sales customer support. During training, we'll assure that your operators are trained to be specialists just as we believe they should be. Once our machines are installed on your floor, we promise a 24/7 lifetime support. To show & strengthen our support, we do also include a 3YR warranty compared to most manufacturers and their "12 month" trust period.
Never used
Cancelled order
Reduced price
Inv14042020
84inc 40inc 32inc XYZ HAAS EC-2000 CNC HMC, Year 2010
w/ tsc, 50taper, 30atc, new gear, probe, convey
w/ tsc, 50taper, 30atc, new gear, probe, convey
w/ tsc, 50taper, 30atc, new gear, probe, convey
Specification:
Travel:
X 84 "
Y 40 "
Z 32 "
Power 30 hp
Speed 6000 rpm
ATC 30
Taper 50
Dimensions 195 x 143 x 119"
Weight 31500 lb
Equipped With:
Chip conveyor
Through spindle coolant
30" diameter built in rotary table full 4th axis
Renishaw Probe
Price $ 120,000 - Ex Work
(2016) NEW NEVER INSTALLED
1635 TON AIDA FOUR POINT CRANK MOTION STRAIGHT SIDE SERVO TRANSFER PRESS
1635 TON AIDA FOUR POINT CRANK MOTION STRAIGHT SIDE SERVO TRANSFER PRESS
BED SIZE 240" X 96.4"
STROKE 24"
DIE HEIGHT 48.03" (SDAU BOLSTER)
ADJUST 11.8"
SPEED (CONTINUOUS) 1-30 SPM
(2) ROLLING BOLSTERS MOVING F-B
MOTOR SIZE (3) X 670 HP
OVER-LOAD PROTECTION
ELCTRONIC CRANK ANGLE INDICATOR
DIE HEIGHT INDICATOR: 0.0001"
MOTOR DRIVEN DIE HEIGHT ADJUSTMENT
FORCED CIRCULATION LUBE SYSTEM
MULTI PROCESS PRESS CONTROLLER
SERVO CONTROLLER
PLC CONTROL
DATA BANK 200 DIE RECIPES
AIR EJECTOR
we believe there is auto die clamping -verifying
Midwest location
trying to get foundation drawing for you
trying to get additional photos
inspection is welcome
contact information for inspection will be given with inspection arrangements
subject to prior sale
subject to our terms and conditions
applicable rigging, transport, taxes are extra if applicable
IGNORE PRICE - OFFERS ARE WELCOMES !!
96"x12' Berthiez VTL single column cnc retrofit, 2013 retrofit
96" Table
12' Swing
60" under rail
50 hp.
single column machine
swivel ram head
100 rpm plus
VDI quick change tooling
1960 retrofit 2013
made in France
highest quality brand name machine
machine has been retrofitted with latest Fanuc CNC control 2013
new ball screws new servo and drives and electrics work now done
side head available at additional cost
Condition: excellent
inv140313 see our store below for additional vbms manual and cnc assorted sizes
Fanuc Alpha OID edm 14.5 x 10.6 x 10in wire edm robocut c400ia 2012 also 2010 and 2008
FANUC WIRE EDM MODEL ALPHA O i D in NEW 2008
Specification Description
Table Size 14.6" x 10.6" x 10.2"
Work Tank Size 30.5" x 23.6" x 9.8"
X Axis Travel 14.5"
Y Axis Travel 10.6"
Z Axis Travel 10"
Machine Weight 4, 000 Lbs
Max Work Piece Weight 1, 100 Lbs
Equipped With:
Control: Fanuc 310is-WA 64 Bit
Automatic Wire Feed System
Chiller Unit for Dielectrical Fluid
* Fanuc Filtration System
* Plus a Ebbco Extra High Quality System
Specification Description
Table Size 14.6" x 10.6" x 10.2"
Work Tank Size 30.5" x 23.6" x 9.8"
X Axis Travel 14.5"
Y Axis Travel 10.6"
Z Axis Travel 10"
Machine Weight 4, 000 Lbs
Max Work Piece Weight 1, 100 Lbs
Equipped With:
Control: Fanuc 310is-WA 64 Bit
Automatic Wire Feed System
Chiller Unit for Dielectrical Fluid
Fanuc Filtration System
also 2012 and 2010 specs similar
invnd-yg021116
Pacific 52 ft x 1000t or 2 x 26 ft overall x 22ft BH ea x 1000 ton DNC 2 machines in tandem
2 x 26 foot overall 22 foot between housings each x 1000 ton brake capacity
660 ton punching capacity
2 machines in tandem
DNC controls
seperate electrical and controls
in plant under power
made in USA
quality brand name
inv050517
Oerlikon Swiss 3M Swing x 12M Centers. 2M chuck. 160 ton carrying cap cnc retrof
Type: lathe cnc retrofit
Model: Oerlikon. Swiss made. 3M Swing x 12M Centers. 2M c
Year: 1963 2013 retrofit
Condition: very good
Price: USD
Quantity: 1
Type of Seller: Dealer Non-Owner
Description:
Built by Oerlikon. Swiss made. 3M Swing x 12M Centers. 2M chuck. 160 ton between centers. Tooling etc. Full specs on request. Can be retro-fit CNC to customer request.
4 way bed
weight of headstock 50 ton
carrying capacity 160 ton
overall weight 200 ton
spindle bore 13 .5 inches
modular construction-
132 inch actual swing
12 metres between centers
made in Switzerland
quality brand name machine of highest quality precision construction
Escher Wyss-oerlikon
inv140313
HAAS GR510 ROUTER EXTENDED Z 20ATC PROBE 5TH AVAIL 2013
2013 Haas GR-510 CNC Gantry Mill
Specifications:
Travels:
X-Axis121”
Y-Axis61”
Z-Axis24”
Table Size122” x 53”
Spindle Speed10, 000 RPM
Spindle TaperCAT#40
Spindle Motor15 HP
Tool Changer20 ATC
Max. Tool Diameter3.5”
Max. Tool Weight12 lbs
Equipped With:
Renishaw Wireless Intuitive Probing System
24” Extended Z Travel
Steel Table
Remote Jog Handle
Color LCD Screen
Rigid Tapping
*4th Axis Wiring and 5th Axis Wiring Available for Additional $4, 000
Invnd181016
Haas EC1600 HMC 64X x 40y x 32z 4th 5axis probe tsc 2008
Haas EC-1600 5-Axis 2008
Machine Type: Horizontal
Manufacturer: Haas
Model: EC - 1600
Year: 2008
Control: Haas 5-Axis CNC Control with Color LCD Monitor
Specifications:
Table/Pallet
Width 36"
Length 64"
Number of Table/Pallet(s) 1
Indexing 360, 000⁰
Maximum Load 10, 000 LBS
Travels
X-Axis Travel 64"
Y-Axis Travel 40"
Z-Axis Travel 32"
Spindle
Spindle Speed 0 - 10, 000 RPM
Spindle Taper 50
Main Motor (HP) 30 hp
Tool Changer 50+1 ATC
Equipped With:
Haas 5-Axis CNC Control with Color LCD Monitor, 1MB Program Memory, USB Port, Remote Jog Handle-E, Full 4th Axis Rotary System, Machine Enclosure including Coolant System and Dual Chip Augers, Programmable Coolant Nozzle, Through Spindle Coolant (300 psi), 5th Axis Drive and Wiring, Macros, Spindle Orientation, Coordinate Rot. and Scaling, Haas Visual Quick Code Probing System, Expanded Memory to 16 MB, Hard Disk Drive (40GB) and Ethernet Interface, Early power failure Detection Module, Auxiliary Coolant Filter System, 10000 RPM, 50 Taper Spindle, 30 HP Dual Drive (Y-Delta) Geared Head, Side Mount Tool Changer with 50+1 Positions, HRT310 NC Rotary Table
invclgimm051116
HAAS VM3 40x 26y 25z 24atc TR210H WIPS Probe Hi Spd COOR
-2005-TR210 24ATC-INV281016.jpg)
-2005-TR210 24ATC-INV281016-3.jpg)
-2005-TR210 24ATC-INV281016-7.jpg)
MACHINE IS FROM
a medical products (implants) manufacturer.
It was only being used to machine plastic.***
Table working surface
Maximum weight on table
Table travel, X-axis (longitudinal)40IN
Table travel, Y-axis (cross)26 IN
Vertical column travel (Z-axis) 25IN
Minimum/Maximum distance, spindle nose to table 4IN/29IN
Spindle taper CAT 40
Spindle speeds, direct drive 0-12000RPM
Rapid traverse rate, all axes-710 IPM
Cutting feed rate, all axes-500 IPM
Maximum tool diameter (adjacent pocket empty)-5 IN
Maximum tool weight-12 LB
Maximum tool length-13IN
Maximum machine height with spindle carrier in up position-118IN
Servo Time: 21502 HOURS
Motion Time:8347 HOURS
Spindle Time:10317 HOURS
25IN x 54IN TABLE
4, 000 Lbs.
Equipped With:
Replacement spindle cartridge purchased from HAAS & installed in October of 2016
All cast iron construction
Brushless servo amplifiers and servo motors on all five axes
25" x 54" work table with t-slots running in both X and Y directions, precision dowel
pin bores, and drilled/tapped holes
#TR210H HAAS 8.27" diameter t-slotted & prorgrammable two-axis trunnion CNC
rotary table with brushless servo drive motor, table mounted air
regulator and pressure valve
HAAS five-axis CNC with 15" color LCD monitor, remote jog handwheel,
high speed machining, rigid tapping, coordinate rotation and scaling, M19
spindle orientation, user definable macros, power failure module, dual RS-232
serial ports, USB & ethernet ports and floppy disc drive
Wireless intuitive probe system (less CAT40 RENISHAW probe)
Twenty-four position side-mount automatic toolchanger with (20) CAT-40 tool holders
Programmable coolant nozzle
Telescopic way covers
Work light
Leveling pads
Chip auger
Automatic air gun
Automatic BIJUR lubrication system
External coolant pump and tank mounted on wheels
30 H.P. vector inline direct-drive spindle
Machine is wired for 208 volt operation.
Approximate Dimensions (Machine Only-Head
Down):
Approximate Weight
INVND281016
Ad Number: 378525
40X 26Y 25Z VM3 24ATC 40Tap PCL, 2004
40X 26Y 25Z VM3 24ATC 40Tap PCL, 2004
Specifications:
Travel 40″ x 26″ x 25″
Tools 24 plus 1 Sidemount ATC
Spindle Speed 12, 000 RPM
Taper CAT 40
Motor 30 HP
Equipped With:
Haas CNC Control
Programmable Coolant Nozzle
Chip Auger
Auto Air Gun
Coordinate Rotation w/ Scaling
Floppy Disk Drive
Ethernet & USB
High Intensity Lighting
High Speed Machining
1MB Expanded Memory
Macros Software
Remote Jog Handle
Spindle Orientation
Visual Quick Code
Control: Haas CNC
INVNGL200916
johanes 11/12/2016
HAAS VF3SSYT 40ATC WIPS TSC 40X 26Y 25Z 2010
Very good overall condition with approx. 8100 hours of spindle on time.
Basic Specifications (buyer to verify):
Specification Description
X-Axis 40″
Y-Axis 26″
Z-Axis 25″
Spindle Nose to Table Range 7.9″ to 32.9″
Table Size 54″ L x 25″ W
T-Slot Width 5/8″
No. of T-Slots 5
Max Weight on Table 1, 750 lbs
Spindle Motor 30 HP
Spindle Speed 12, 000 RPM
Spindle Taper CT 40
Rapid Feedrates 1400″/min (X, Y, and Z)
Tool Changer Capacity 40 + 1
Position (side-mounted)
Max Tool Diameter (Adjacent Empty) 7″
Max Tool Diameter (Full) 4″
Max Tool Length 16″
Max Tool Weight 30 lbs
Tool-to-Tool 1.6 sec
Chip-to-Chip 2.2sec
Drive System In Line
Max. Cutting Rate 833 IPM
Air Required 4 SCFM @ 100 PSI
Coolant Capacity 55 gal
Weight 16, 000 lbs
Dimension 142″ x 117″ x 128″
Features:
* Side Mount Tool Changer, 40 + 1 tools.
* Through-Spindle Coolant, 300 PSI
* 4th-Axis Drive & Wiring
* 5th Axis Drive & Wiring
* Wireless Intuitive Probing System
* Programmable Coolant Nozzle
* Chip Auger
* Expanded Memory
* Dynamic Work Offsets and Tool Center Point Control
* High-Speed Machining
* No tool holders/vises/tables etc. are offered with machine.
Further Notes:
* Vises and Haas TR210 5 axis Truninon Table can be purchased separately
INVMT071016
Ad Number: 377895
Haas VF6SS 64x 32y 30z 12K 40t 24atc 974 hrs 2012
Haas VF6SS 2012
Table Dimensions: 64" x 28"
Table Weight Capacity: 4, 000 lbs.
Spindle Taper: CAT #40 Taper
X Y Z Axis Travel: 64in x32in x30in
Spindle Speed: 12, 000 RPM
Spindle Motor: 30 HP
Tool Magazine Capacity- Side Mount 24 + 1 Position ATC
Spindle Nose to Table 4" - 34"
invndmp141216
64X 32Z 30Y Haas VM6 CNC Vertical Mill 40Tapper 4th & 5th Axis Wiring, 2010
64X 32Z 30Y Haas VM6 CNC Vertical Mill 40Tapper 4th & 5th Axis Wiring, 2010
Specifications:
Travels:
X-Axis 64”
Y-Axis 32”
Z-Axis 30”
Table Size 64”x 28”
Max. Table Load 4, 000 lbs.
Spindle Nose to Table Top 4” – 34”
Spindle Taper CAT#40
Spindle Speed 12, 000 RPM
Spindle Motor 30 HP
Tool Changer 24 ATC
Equipped With:
4th & 5th Axis Wiring
Extended 8” Z Clearance
Chip Auger
Intuitive Programming
Programmable Coolant
*TR-310 Trunnion Available For $24, 900
invndlsr211016
johanes 11/12/2016
HAAS VF6 50 tap
64x 32y 30z 30hp
30atc 5000 rpm 4th
COR QC auger CTS
1998
Description:
Make: HAAS Vertical Machining Center
Model: VF-6/ 50
Year: 1998
Table Size: 64” x 28”
Table Travels: (x) 64”
(y) 32”
(z) 30”
Table Load Capacity: 4,000 lbs.
Spindle Nose to Table: 4”– 34”
Spindle Speed Range: 5000 rpm
Spindle Taper: CAT 50
Spindle Motor: 30 HP.
(Click Image To Enlarge)
Rapid Feedrate: 540 IPM- x, 600 IPM- y,z.
Maximum Cutting Feedrate: 500 IPM
Maximum Tool Weight: 30 lbs.
Approximate Weight: 22,500 lbs.
Overall Dimensions: 177” L x 123” D x 124” H
Electrics: 220/3/60
Machine c/w: CTS, rigid tapping, chip auger, 30 ATC,
1 MB memory, coordinate rotation &
scaling, remote- jog, 4th axis pre- wired,
quickcode programming.
Machine Condition: Good
FADAL MAG VMC 6030HT 60X 30Y 28Z 10K 2008
TRAVELS:
X-AXIS: 60"
Y-AXIS: 30"
Z-AXIS: 28"
SPINDLE TAPER: CAT#40
TOOL HOLDERS: 21 ATC BI-DIRECTIONAL
MAIN MOTOR: 22.5 HP
SPINDLE SPEED : 10, 000 RPM AIR/OIL
EQUIPPED WITH:
Fadal Multi Processor CNC Control
expanded memory 8 meg
rigid tapping
extra work light
some tooling
Invilut281216
See our store below for additional
Fadal and machines assorted models
Haas VF9 50T 84x 40y 30z tsc geared 4th 2006
OKUMA MCV20 157X 78Y 19.5Z 80BH 3987 X 1981MM X 495MM 1997
okuma mcv20 157x 78y 19.5z 80bh 3987x1981x495mm 1997
Location:
U.S.A.
Manufacturer:
Okuma
Type:
gantry or bridge mill
Model:
mcv20 157x 78y 19.5z 80bh
Description:
1997 Okuma Model MCV20All CNC Vertical Bridge-Type Machining Center
Specifications:
X Travel 157.5in-3987mm
Y Travel 78.75in-1981mm
Z Travel 19.5in-495mm
Table Size 110in x 59in
Distance Between Columns, Approx. 80″
Spindle Speed 6000 RPM
Spindle Taper CAT-50
Control Okuma OSP7000M
Tool Changer 24 Station
Preliminary Specifications – Subject to Verification
made in Japan
high quality made brand name machine
usa location
invv031116
see our store below for additional gantry or bridge mills
Ad Number: 378744
Okuma Multus B400W Big Bore live Y ax subsp univhd 2008
Okuma Multus B400W Big Bore live Y ax subsp univhd 2008
Manufacturer:
Okuma
Type:
LATHE CNC C AXIS LIVE TOOLING AND SUBSPINDLE
Model:
Multus B400W BB live yax sub
Year:
2008
Condition:
excellent
Price:
- USD
Quantity:
1
Description:
OKUMA MULTUS B400W Big Bore CNC TURNING CENTER
with Universal Head, Live Tooling, Y-Axis and Sub-Spindle
Model Multus B400W-1500, New 2008,
Equipped With:
OKUMA OSP P200 CNC .0001m Programming, Big Bore Option A2-11 Spindle Nose,
(38-3800 RPM, 30/20HP), 40 Station Automatic Tool Changer
CAPTO C6 Spindle Taper, Thru Spindle Coolant, Tool Setter, Tool
Management System, Contouring B-Axis,Hi-G Control, Lathe Tool Index,
Plane Conversion, Profile Generation, Helical Cutting, Y-Axis Scale,Mist
Collection System, Concept 2000 Chip Conveyor & Coolant System.
Too Many Options to List ! Includes Large Tooling Package !
Specifications:
CATALOGUE SPECIFICATIONS:
Max Swing Over Saddle....................................... 27.95"
Max Machining Diameter...................................... 27.95"
Max Working Distance Between Spindles....................... 61.02"
Cross Travel (X-Axis)....................................... 27.17"
Longitudinal Travel (Z-Axis)................................ 60.83"
Y-Axis Travel .............................................. 9.02"
B-Axis Universal Head Swivel................................ 225 Degree
W-Axis Sub-Spindle Slide.................................... 60.54"
C-Axis on Both Spindles..................................... .001 Degree
Tool Positions ............................................. 40 Total
Spindle Bore ............................................... 4.15"
Spindle Nose ............................................... A2-11
Spindle Speed Range ........................................ 38-3800 RPM
Opposed Spindle Range ...................................... 38-5000 RPM
Spindle Horsepower Both Spindle............................. 30 HP Each
Live Tooling Speed Range.................................... 90-10000RPM
Live Tooling Horsepower..................................... 15 HP
Approximate Machine Dimensions.............................. 193" x 101"
Approximate Machine Height.................................. 119"
Approximate Machine Weight.................................. 31,000 LBS
CONDITION: Appears to be in Excellent Condition !
invrgvk061113
Haas ST30 31.75in swing 3.5in bore probe 2015
HAAS CNC Turning Center,
Model ST-30, New 2015
Specifications:
Swing Over Front Apron: .............................. 31.75"
Swing Over Cross Slide: .............................. 20.75"
Maximum Cutting Diameter: .............................. 21.0"
Maximum Cutting Length: .............................. 26.0"
Travels – X-Axis: .............................. 12.5"
- Z-Axis: .............................. 26.0"
Rapid Traverse Rate – Both Axes: .............................. 945" / Min.
Spindle Speeds: .............................. 3400 RPM
Spindle Nose: .............................. A2-6
Spindle Bore: .............................. 3.5"
Spindle Motor: .............................. 30 HP 3/60
Equipped With:
Haas CNC Control w/ 15" Color LCD Monitor and USB Port
10" Hydraulic Chuck
12-Postiion Turret
Tailstock
Rigid Tapping
Work Gauging Probe
Expanded Memory
Cooler Unit for Electronics
On Location, Plant Site
Invtlats191016
See our store below for additional
Haas machines assorted models and age
3 and 5 axis
Haas TL-2, 2007
CNC/ Manual Toolroom Lathe
Haas TL-2, 2007
CNC/ Manual Toolroom Lathe
HAAS TL4 35IN X 91IN CC 10.81 IN BORE 2008
HAAS TL-4
NEW: 2008
SPECIFICATIONS:
SWING OVER FRONT APRON........... 35"
SWING OVER CROSS SLIDE........... 16"
DISTANCE BETWEEN CENTERS......... 91"
MAX MACHINING LENGTH............. 80"
X-AXIS TRAVEL.................... 18"
Z-AXIS TRAVEL.................... 80"
X-AXIS RAPID TRAVERSE............ 150 IPM
Z-AXIS RAPID TRAVERSE............ 320 IPM
SPINDLE MOTOR.................... 55/60 HP
SPINDLE SPEED.................... 500 RPM
SPINDLE NOSE FRONT & REAR........ A1-20
SPINDLE BORE..................... 10.81"
BAR CAPACITY..................... 10.81"
EQUIPPED WITH:
25", 4-JAW CHUCK ON FRONT
25", 3-JAW CHUCK ON REAR
2 SPEED GEAR BOX
BELT-TYPE CHIP CONVEYOR
MANAUL TAILSTOCK (INCLUDED PLATFORM WITH 80" TRAVELS)
QUICK CHANGE TOOLPOST (2 TOOL POSTIONS AT 90 DEGREES)
COOLANT SYSTEM - (100 GALLON)
REMOTE JOG HANDLE
RIGID TAPPING
INTUITIVE PROGRAMMING SYSTEM
BUILT-IN THREAD REPAIR & THREAD RE-CUT CYCLES
SPINDLE ORIENTATION
CONSTANT SURFACE FINISHING
USB
INVYT231013
2006 HAAS SL-40LB Chuck Size 20" Max Diameter Bar Capacity 6.25"
2006 HAAS SL-40LB
Chuck Size 20"
Max Diameter Bar Capacity 6.25"
Max Swing Over Bed / Carriage 40" / 25"
Max Turning Diameter 25.5"
Distance Between Centers 89"
Max Machining Length 80"
Tools 10
Spindle Speed 1400 RPM
Spindle Bore 7.08"
Spindle Nose A2-11
Spindle Motor 55 HP
Spindle Torque 2400 ft. lbs.
Rapid Traverse Rates (X / Z) 710 / 320 IPM
X-Axis Travel 17"
Z-Axis Travel 80"
Turret Index (Single Step) 1 Second
Tailstock Taper MT#5
Machine Dimensions (L x W x H) 234" x 95" x 86"
Machine Weight 31,000 lbs.
FEATURES:
HAAS 32-BIT CNC CONTROL
15" Color TFT
3.5" Floppy Disc Drive
24" Hydraulic Chuck
7" Big Bore Spindle Option
80" Cutting Length
55 HP Vector Dual Drive Motor
Steady Rest Provision
Two Speed Gearbox
Fully Programmable Hydraulic Tailstock
Tool Presetter
Hennig Chip Conveyor (Side Exit)
Green Work Indicator Light
invhcdd060613
2001 HAAS SL-30T CNC TURNING CENTER
GENERAL SPECIFICATIONS:
DATE OF MANUFACTURE 2001
SWNG OVER FRONT APRON 30"
SWING OVER CROSS SLIDE 14.5"
DISTANCE BETWEEN CENTERS 39"
X AXIS TRAVEL 11.3"
Z AXIS TRAVEL 34"
RAPID TRAVERSE RATE ALL AXES 710 IPM
SPINDLE NOSE A2-8
SPINDLE SPEEDS 3400 RPM
SPINDLE MOTOR 30 HP
SPNDLE BORE 3.5"
MAX. BAR CAPACITY 3.0"
SPINDLE MOTOR 30 HP
TURRET CAPACITY 12 STATIONS
TAILSTOCK CENTER MT #4
TAILSTOCK BODY TRAVEL 33.5"
APPROX. DIMENSIONS 147" x 77" x 75"
MACHINE WEIGHT (APPROX) 16,000 LBS
EQUIPPED WITH:
HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN
RS-232C PORT INTERFACE FOR DNC OPERATION
10" 3-JAW MMK HYDRAULIC THROUGH HOLE CHUCK
TOOL PRESETTER, 1MB MEMORY, CHIP AUGER
SPINDLE ORIENTATION, DELTA WYE MOTOR
PARTS CATCHER, FLOPPY UPGRADED TO USB PORT
FULLY ENCLOSED SPLASH GUARDING/ENCLOSURES
ALL AVAILABLE TURRET TOOLING & MANUALS
UNDER POWER ON OUR FLOOR
Condition: excellent
500 Hours on meter.
LOCATION: IN PLANT UNDER POWER
20" x 28" x 16" Mitutoyo Manual Coordinate Measuring Machine
Travels 20" x 28" x 16" X,Y,Z
Software Cosmos Version 1.4
Computer/Printer/Prob/Clamping 21,500.00 in Ontario, Canada
Komatsu 3000 ton transfer press 264 x 72 in mech
3, 000 Ton Komatsu 2-Point, Mechanical Straight Side Transfer Press
Total Bed Length 528"
Total Tonnage 3, 000-2000 ton plus 1000 ton 264 x 72 each side
Bed Size........................528" LR x 72" FB
Stroke..........................24"
Shut Height.....................48" SDAU - Over Bolster
SPM.............................10 - 20 Variable
Pass Line ......................30.25" Off Bolster
Number of Cushions..............14 - 32" x 28" x 20 Ton Each - 15"
Stroke
Hydraulic Knockouts.............28 - 5 Ton x 10" Stroke Each
Equipped With:
HMS Automatic Blank Feeder
528" Atlas Servo Transfer System - Lift Axis (Z) 0" - 30" Clamp Axis
(Y) 0" - 24" Transfer Axis (X) 0" - 48"
40, 000# x 72" x .125" (.250" @ 48") Servo Feed Line (Optional)
Overall Dimensions 335" L-R x 241.75" F-B (including motor & drive) x
360" AGL
inv010916
see our store below for additional presses assorted sizes and age and brand
Komatsu 1000 ton 144 x 90in-3657 x 2286mm 42str-1066mm 1980 -4 machines available
2000 Ton Danly SE4-2000-180-84 TF Transfer Press
DANLY 2000 TON PRESS
Model SE4-2000-180-84 TF
Capacity - 2000 Tons @ 1/2"
Bed - 180" x 84"
Stroke - 28"
Shut Height - 64" (SDAU, Adaptor to Carrier)
Adjustment - 8"
Strokes Per Minute 10-20 (Variable)
(2) Rolling bolsters (Bi-Directional)
Windows - 136" wide
Hydraulic overloads
Includes Transfer System
May Be Seen Under Power
EXCELLENT Condition
$895,000.00 USD
2005 Mori Seiki MT2000a1SZ w/ MSX-501T w/MappsII (Fanuc 18i)
Built-In Work Lights Caps MT Off Line Programming System
Caps MT off Line Programming Simulation Color Display
Conversational and G-Code Programming Tool Path Graphics
PCMCIA/RS-232 Interfaces Load Monitor
Tool Life Management Multiple Repetitive Cycle1 (TypeI and Type II Canned Cycle)
Custom Macro Programmable Data Input G10
Number of Stored Programs 125 Hydraulic Cylinder & Draw Tube (Main Spindle)
A2-6? Spindle Nose, 2.9? Spindle thru Hole (2.5 thru Draw Tube) Main Spindle
8? Hollow Hydraulic Chuck w/ 1 set of Soft Jaws (Main Spindle) 45-4,500RPM(Main Spindle)
30/20 HP Main Spindle
High/Low Chuck Pressure System (Main Spindle) Air Blow (Main Spindle)A2-5? Spindle Nose (Sub Spindle)
8? Hollow Hydraulic Chuck w/ 1 set of Soft Jaws (Sub Spindle) 20 HP Sub Spindle
High/Low Chuck Pressure System (Sub Spindle) Air Blow (Sub Spindle)
Tool Spindle Taper Hole Capto C6 Tool Spindle 12,000RPM (24.7/20HP)
180 Tools ATC Magazine Automatic Tool Presetter (Tool Spindle)
Automatic Tool Presetter (Bottom Turret) Tool Offsets B Axis-720 Sets
Tool Offsets Lower Turret-99 Sets Part Program Length 520 Meters
Lower Turret 12 Station Bolt Down Type (12 Live) Parts Catcher
High Pressure Coolant Interface (Rated for 1,000 PSI) Signal Tower 3 Stage
Barfeed Interface Chip Conveyor
4 Spindle Liners Cool-Jet System 1,000 PSI Dual Filter Unit
11 T00159 Dual Turning Holders
Haas vf6 64x 32y 30 64 x 38" tble 10krpm 24atc sdmt 2004
haas
Type:
vmc vertical machining center
Model:
vf6 40 taper 64x 32y 30z 10k
Year:
2004
Condition:
Excellent
Price:
- USD
Quantity:
1
Type of Seller:
Dealer Non-Owner
Description:
HAAS VF-6/40 5-AXIS CNC VERTICAL MACHINING CENTER
NEW 2004
SPECIFICATIONS:
TRAVELS:
- X AXIS.....................64"
- Y AXIS.....................32"
- Z AXIS.....................30"
MAX. SPINDLE SPEED...........10,000 RPM (upgrade)
SPINDLE TAPER...............#40
TOOL CHANGER CAP. ...........24 ATC Side Mounted
SPINDLE MOTOR................30 HP
EQUIPPED WITH:
High Intensity Lighting
10000 RPM Spindle Upgrade
16 MB Memory
High Speed Machine Software
Chip Auger
Programmable Coolant Nozzle
Visual Quick Code
Floppy Disc Drive
Remote Jog Handle
Hours On Machine: Servo- 2861 - Motion-523 - Spindle- 580
Note: Battery replacement cleared the motion and spindle hours. The SERVO HOURS are Correct.
invkwnhcm251013
2009 Qier CKJ-5250 x 3150 CNC VTL
1 used CNC Vertical Turning Lathe
Make QIER Type CKJ-5250 x 3150
New in 2009
Control FANUC 0i TT (for right & left ram control)
Max. Cutting diameter 5.000 mm
Max. Height of work piece 3,150 mm
Max. Weight of work piece 50 ton (metric)
Table diameter 4,500 mm
Speed range (stepless) 0.5 – 50rpm
X-Axis travel right ram 20 – 2,765 mm
X-Axis travel left ram 20 – 2,766 mm
Vertical travel (Ram) 1,400 mm
Feed range 1 – 500 mm/min
Rapid speed of ram 4,000 mm/min
Ram size 50 x 50 mm
Main Motor DC 120 kW
Adjustable cross rail (not an axis)
Electrics and hydraulics are to US spec.
The machine is in excellent condition
Price - on location China $749,500.00
This price does not include any tooling, leveling plates, or table jaws
We are partners in this machine, so you can be assured entire transaction will go smoothly and simply.
1 used CNC Vertical Turning Lathe
Make QIER Type CKJ-5000 x 2500
New in 2009
Control FANUC 0i TT (for right & left ram control)
Max. Cutting diameter 5.000 mm
Max. Height of work piece 2,500 mm
Max. Weight of work piece 50 ton (metric)
Table diameter 4,500 mm
Speed range (stepless) 0.5 – 50rpm
X-Axis travel right ram 20 – 2,765 mm
X-Axis travel left ram 20 – 2,766 mm
Vertical travel (Ram) 1,400 mm
Feed range 1 – 500 mm/min
Rapid speed of ram 4,000 mm/min
Ram size 50 x 50 mm
Main Motor DC 120 kW
Adjustable cross rail (not an axis)
Electrics and hydraulics are to US spec.
The machine is in excellent condition
Price - on location China $729,500.00
This price does not include any tooling, leveling plates, or table jaws
We are partners in this machine so you can be sure the transaction will go smoothly and simply.
